Vertiv
Vertiv NPSII 60 AMP 3 Pole NPS-II FL3
Vertiv NPSII 60 AMP 3 Pole NPS-II FL3
Couldn't load pickup availability
Vertiv NPSII 60 AMP 3 Pole NPS-II FL3 DatasheetΒ
The Vertiv Network Power Switch (NPS) is a remote power management device designed for networking equipment, data centers, and IT infrastructure. It enables users to control, monitor, and reboot connected devices via a network interface, improving uptime and operational efficiency.
Intelligent static transfer switches
Network Power Switch - I, Network Power Switch β II
Ensures maximum reliability to critical loads by eliminating system failures that are caused by power distribution problems.
The NPS-I & NPS-II switches allows instantaneous transfer of load between two power sources. It can be used to ensure complete redundancy of power supply upto the last piece of wire. It is useful in many applications, where redundant power supply is available, either from two UPS systems or one UPS and bypass source.
These switches are comprising of semiconductor switches, they ensure continuity of power to the load in the event of failure of one of the power sources. They have different user selectable parameters and in-built microprocessor.
Vertiv NPS-II FL3 β 60 A (3-Pole) Technical Specifications
|
Parameter |
Specification |
|
Ampere Rating |
60 A |
|
Input / Output |
3 Phase |
|
No. of Switching Poles |
3 Pole (Ph) |
|
Nominal Output Current |
60 A |
|
Nominal Voltage |
400 / 415 V (3 Ph + N) |
|
Voltage Tolerance |
Low band: β30% to +15% (Default), Medium band: β25% to +15%, Narrow band: β15% to +15% |
|
Nominal Frequency |
Nominal: 48β52 Hz, Wide: 40β70 Hz (Default) |
|
Efficiency |
> 98% |
|
Overload Capacity |
110% for 1 hour, 150% for 1 min, 1000% for 100 ms |
|
Duty |
Continuous |
|
Protections |
Input Under Voltage, Input Over Voltage, Output Overload, Output Short Circuit |
|
Transfer / Retransfer Time |
Low Sensitivity: < 8 ms, Medium Sensitivity: < 5 ms (Default), High Sensitivity: < 3 ms |
|
Manual Bypass Facility |
Provided |
|
Acoustic Noise Level |
< 60 dBA |
|
Operating Temperature |
0 to 40Β°C |
|
Relative Humidity |
Up to 95% (Non-condensing) |
|
Altitude |
< 1000 m above sea level (without derating) |
|
Testing Standard |
IEC 62310-3 |
|
Enclosure Protection |
IP 20 |
|
Cooling |
Forced Cooling |
|
Dimensions (W Γ D Γ H) |
800 Γ 600 Γ 1750 mm |
|
Weight |
225 kg (approx.) |
|
Color |
RAL 7021 |
|
LCD Display Parameters |
Source 1 R/Y/B Phase Voltage, Source 2 R/Y/B Phase Voltage, Source 1 Priority, Source 2 Priority, Output Load R/Y/B, Sensitivity Low/Medium/High, Date & Time |
|
LED Indications |
Source 1 Healthy, Source 2 Healthy, Source 1 Feeding, Source 2 Feeding |
|
Fault Indications |
SPP, Overload |
|
Communication Interface |
RS-485 Modbus (optional) |
